Electrical line oval eye bolts
DESCRIPTION
The electrical line oval eye bolts.It always use forging product to product.And its always use the flame heating.Flame heating is to use the fuel (coal, coke, crude oil, diesel and gas) in flame furnace combustion to produce a large amount of heat (fire), high temperature gas pass rough surface, the heat by convection, radiation and heat conduction from the surface to the center and make the metal blank heating. Flame heating method has the advantage of convenient fuel source, the stove in the work of simple, lower heating costs, adaptation range of blank.But the labor condition is poor, the heating speed is slow, the efficiency is low, the heating quality is difficult to control.This heating method is widely used in heating of various blank.
| Catalog | Diameter | B | C | E | Washer | MFL LBS | Thimble |
|---|---|---|---|---|---|---|---|
| AROE-01 | 5/8 | 2 | 1-1/2 | 3-1/2 | 4 X 4 X 3/16 | 16000 | 1/4-3/8 |
| AROE-02 | 3/4 | 2 | 1-1/2 | 3-1/2 | 4 X 4 X 1/4 | 23000 | 3/8-1/2 |
| AROE-03 | 7/8 | 2 | 1-1/2 | 3-1/2 | 4 X 4 X 3/8 | 30000 | 1/2-5/8 |
The electrical line oval eye bolts supplied complete with one square nut unless otherwise specified
Washer and thimble can be supplied at additional cost.
The recommended size of washer and thimble as stated above
All ferrous parts hot dip galvanized or zinc plated
The electrical line oval eye bolts confirm to requirements of ANSI C135.2
PICTURES AND PACKAGING
Do you interests,contact us by
Tel: +86 19661944850
