hardware fitting pistol grip aluminum tension clamp
Tension clamp is used to hold a wire in place to withstand wire tension, and to hang the wire to a metal fixture on a strapless or pole tower. It is used for corner, connection, and terminal connection it is easy to install, fast, lower construction cost. A tension clamp is used to hold a wire or a lightning conductor in a non-linear pole tower to hold an insulator string, anchor action, and also to hold the pull line of the cable tower. Clamp reliable grip strength, uniform stress distribution of the winding, does not damage the winding, improve the ability of the winding resistance to vibration, high strength, greatly extend the service life of the wire, it simple installation, convenient for construction, can shorten the construction time, without any special tools, and clamp installation and reliable in quality, can be tested with the naked eye, don't need to be trained. It has good corrosion resistance and high quality materials. The material is in line with the conductor, ensuring the thread clamp.It is like a pistol grip and material is aluminum.