The oval steel eye nut is used in the threaded end of the cross - arm bolt to carry out the non - dead Angle and from the end of the thread.
The oval eyes are made of mold hot forging.
After forging, we need to drill the threaded hole and then galvanize.Finally, click on the thread.
The bearing capacity of the oval nut is 65KN, and the material is AISI 1018 steel or astm1045 steel.
The surface is hot dip galvanized A153 to meet the ASTM specification.
The size has 5/8 eye nut or 3/4 eye nut.