Heavy duty version of our forged eye nut. Lifting Forged Eye Nuts make coupling long bolts simple. Easy grasp nut is forged of 316 stainless. The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the nut.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.
1/2" Tap Galvanized Eye Nut - 2250 lbs WLL
Material: As specified by BS3974 normalised.
Not to be used for incline lifting.
Supplied with Metric Coarse threads, other pitches available on request.
For larger sizes we offer our Swivel Hook Bows.
Alternative thread forms available.
Drop forged steel
Recommended for in-line pull (capacity is reduced with angular loads)