Thimble eye Angled Guy Eye Bolt for guying utility pole
Product Information
Anchor Rods |
Used for guying utility poles. |
For use with expanding and cross-plate anchors |
Contoured to prevent damage to strand. |
Each rod is threaded 3-1/2" minimum length |
Minimum tensile strength is 16000 lb. |
All the rods are assembled with a heavy square nut. |
Anchor Rods conform to IEEE Standard C135.2 (1999) and Bell Specification CAO 7082. |
Hot dip galvanized to meet ASTM Specification A153, Class B1 and C. |
Poleline HDG Thimbl eye Angled Guy Bolt
Used for dead-ending and attaching guy wires to poles and crossarms.
Supplied with cone point to ease assembly with nut.
Supplied with an attached square nut.
Hot dip galvanized to meet ASTM Specifications A153.
Minimum thread length is 4".
Specifications | |
Type | Rod Dia (Inch) X Length (Ft) |
SINGLE STRAND ANCHOR ROD | 5/8" X 5' |
5/8" X 6' | |
5/8" X 6' | |
5/8" X 8' | |
5/8" X 7' | |
5/8" X 8' | |
5/8" X 10' | |
DOUBLE STRAND ANCHOR ROD | 5/8" X 6' |
5/8" X 7' | |
5/8" X 8' | |
3/4" X 6' | |
3/4" X 8' | |
3/4" X 9' | |
1" X 8' | |
1" X 10' | |
TRIPLE STRAND ANCHOR ROD | 3/4" X 8' |
3/4" X 9' | |
1" X 8' | |
1" X 10' |
SIZE AND SPECIFICATION:
Straight Type | Dimension Inch (mm) | ||
CROP No. | D | A | B |
TBS34-08 | 3/4(20) | 8(200) | 4(100) |
TBS34-10 | 3/4(20) | 10(250) | 4(100) |
TBS34-12 | 3/4(20) | 12(300) | 6(150) |
TBS34-14 | 3/4(20) | 14(350) | 6(150) |
TBS34-16 |
DETAILS VIEW OF The Thimble eye Angled Guy Eye Bolt for guying utility pole
HEATING PROCESS AND FORGING FOR POWER LINE HARDWARE EYE BOLT
PACKING OF THE GALVANIZED FORGED EYE BOLT FOR OVERHEAD LINE ACCESSORY