Line fitting power anchor rods
Product description
Line fitting power anchor rods are manufactured in a variety of configurations. Engineers will determine the appropriate grade, size, and configuration of a Line fitting power anchor rods based on its application and the forces acting against it.The optimized ultrasonic waves allow determining any corrosion defects on buried Line fitting power anchor rods.
All Line fitting power anchor rods, regardless of their configuration, will need a threaded end projecting from the concrete. Threads are either cut or rolled. Cut threads are typically made by chasers, which remove steel from the round bar creating the threaded area. Rolled threads are formed through an extrusion process in which two dies displace the steel to form the threads.
1Line fitting power anchor rods are assembled with 1 heavy hex nut or square nut.
2.Line fitting power anchor rods can be supplied in straight forms or 45-degree angle forms.
3.Line fitting power anchor rods can be supplied in single thimble or double thimbles.
4.Line fitting power anchor rods are made of carbon steel SAE 1010 to 1020, hot dip galvanized according to ASTM-A153.
CODE | THREAD DIA | ROD DIA MM | LENGTH | TENSILE STRENGTH |
7556 | 3/4'' | 19 | 6ft | 105KN |
7557 | 3/4'' | 19 | 7ft | 105KN |
7558 | 3/4'' | 19 | 8ft | 105KN |
Package: bulk packing; palletized; as required
Origin: China
Raw material: carbon steel Q235
Finish: HDG
ODM&OEM service: yes
Sample: available
Payment term: T/T, 30% prepayment and 70% balance against B/L