adaptor anchor rods for power line
Details
Adaptor anchor rods for power line are furnished for use with one, two, three or four guys. The drop-forged eyes have a generous radius to take the guy strand without distorting it.
Many thousand of miles of high-voltage electric transmission power lines are supported by guy wire attached to adaptor anchor rods for power line. The adaptor anchor rods for power line ranged from 0.5 to 1.5 inches in diameter and from 7 to 10 feet in length and embedded in soil or concrete.
A long wavelength wave fills the entire cross-sectional area of the rod(s) and then propagates along its/their total length. Additionally, the operating frequency is determined using dispersion curve of adaptor anchor rods for power line and attenuation at the selected frequency. The dispersion curve is used to select the frequency region at which the generated guided waves have little to no dispersion. The optimized ultrasonic waves allow determining any corrosion defects on buried adaptor anchor rods for power line
1.Diameter: 5/8" 3/4" 1"
2.Length: 1-10 ft
3.Finishing: HDG
4.Certificate:ISO9001
A long wavelength wave fills the entire cross-sectional area of the rod(s) and then propagates along its/their total length. Additionally, the operating frequency is determined using dispersion curve of anchor rod and attenuation at the selected frequency.
Welcome you contact us.
